Mobile Locksmith. Mon–Fri 8AM–5PM · Raleigh & the Triangle
(984) 207-5553
Licensed · Insured · Local

Panic Bar Installation & Exit Devices in Raleigh, NC

Installation and service of crash bars, rim devices, and vertical-rod exit hardware that keep commercial doors safe and secure.

Mon–Fri 8AM–5PM 4.9-star rating on Google Upfront pricing

What is the difference between a panic bar and an exit device?

The terms are used interchangeably: a panic bar (also called a crash bar or panic hardware) is a type of exit device, a push bar that unlatches a door for reliable egress. Exit devices also include rim, mortise, and vertical-rod types for different doors. Locksmith Raleigh installs and services all common exit hardware in Raleigh.

Exit hardware is life-safety equipment. It must release reliably under pressure while keeping the door secure from the outside.

We supply, install, and service the full range of exit devices, matching the device type to your door and keeping outside trim secure.

What This Service Includes

All device types

Rim, mortise, and vertical-rod exit hardware.

Install & service

New installs plus repair of failing devices.

Secure trim

Control outside access without limiting egress.

Compliance-minded

Hardware that supports egress requirements.

Why Choose Locksmith Raleigh

Life-safety expertise

We treat exit hardware with the care it requires.

Reliable release

Devices that work when they must.

Outside security

Doors that resist entry while allowing exit.

Serving Raleigh & the Triangle

Mobile locksmith coverage across Wake County and nearby communities:

Call Us Today

Need a locksmith in Raleigh or the Triangle? We are ready to help.

CALL (984) 207-5553

★★★★★  Rated 4.9 on Google

What Our Customers Say

Real reviews from Raleigh homeowners, drivers, and businesses we have helped.

★★★★★

“Great experience with locksmith Raleigh and David that came fast and unlock my car in 2 minutes without any damage”

Deandre Mcknight Google review
★★★★★

“David was a lifesaver! I locked myself out and he came over, was super friendly, explained what he was doing, and got me back in without any damage.”

Dremisha Johnson Google review
★★★★★

“Great service from David! He showed up on time, was very professional, and got the job done. He made the whole process stress-free, and the price was fair too.”

Diamond Khabah Google review
★★★★★

“Great prices and great work. You won't be disappointed. I will definitely use them again if I need help.”

Shacarra Dissak-Delon Google review

How Panic Bar Service Works

Exit device on a metal security gate

A panic bar must open the door with one push from inside, every time. We check the device, the latch, the strike and the door together, because a dropped door or a weak closer is a common reason an exit device stops latching.

We repair rim, mortise and vertical rod devices, replace worn parts, and handle exit device installation where a door needs one. If the door also needs electric release, see electric strikes or magnetic locks.

Types of Exit Devices

Exit devices all open with one push from inside, but they latch in different ways, and the right one depends on the door.

TypeHow it latchesCommon use
Rim deviceA latch on the face of the door catches a strike on the frame.Single doors; the most common type.
Mortise deviceThe latch sits in a lock case inside the door edge.Main entrances and busy doors that need a tougher lock.
Surface vertical rodRods on the door face latch at the top and bottom.Double doors without a center post.
Concealed vertical rodRods hidden inside the door latch at the top and bottom.Pairs of doors where a cleaner look is wanted.

Outside trim decides what happens from the street side: no trim (exit only), a pull, a lever, or a key cylinder. Dogging holds the latch back during business hours so the door can be pushed open from outside; fire-rated exit devices (fire exit hardware) are not allowed to be dogged mechanically.

Signs a device needs service: the bar sticks or needs a hard push, the door does not latch when it closes, a vertical rod is bent or loose, or the outside key or lever no longer pulls the latch back. Most of these are fixed with adjustment or a replacement part, and many are caused by a door closer that needs adjusting.

Common Situations We See

An exit device does not latch when the door closes.

A vertical rod has bent or come loose.

The outside trim key no longer retracts the latch.

A new exit door needs a panic bar fitted.

What to Expect and What Affects the Price

Before we start, we confirm which entrance needs work and who can approve it, such as the owner, the property manager, or a named site contact. That person can also tell us about access and business hours. We agree the scope before any work begins and plan the work so the exit is never left blocked. When we finish, we check that the door opens with a single push from inside and latches again every time it closes.

Price depends on the device type (rim, mortise or vertical rod), whether parts can be repaired, and whether outside trim or electric release is needed.

Frequently Asked Questions

Our crash bar is loose and noisy, can you fix it?
Yes. We service and re-secure exit devices or replace worn ones.
Can you key the outside of an exit door?
Yes, with keyed outside trim that does not affect egress.
Why does our panic bar not latch?
Usually the door has dropped, the strike has moved, or the closer is not pulling the door shut firmly enough. We check each.
Can a panic bar be locked from outside?
Yes, with outside trim and a key cylinder, while still opening with one push from inside.
Callback Request

Request a Callback

Need locksmith service or an estimate in Raleigh or the Triangle? Leave your details and a technician will call you back.

Protected by reCAPTCHA. Google's Privacy Policy and Terms apply.